SCILUTION

จอมอนิเตอร์ / คอนโทรลเลอร์ของ CO Monitor คาร์บอนมอนอกไซด์

฿0.00
uReal time detection and controlling ambiance carbon monoxide leveluDetectio จอมอนิเตอร์ / คอนโทรลเลอร์ของ CO Monitor คาร์บอนมอนอกไซด์
  • หมวดหมู่ : GAS Detector เครื่องวัดก๊าซ
  • รหัสสินค้า : 000911

รายละเอียดสินค้า จอมอนิเตอร์ / คอนโทรลเลอร์ของ CO Monitor คาร์บอนมอนอกไซด์

u        Real time detection and controlling ambiance carbon monoxide level
 
 
u        Detection temperature and optional relative humidity
 
 
u        Preset the 1st and 2nd alarm point for carbon monoxide measurement
 
 
u        LCD display CO level, temperature and humidity at the same time
 
 
u        Provide up to 1 analog signal output and 2 dry contact outputs
 
 
u        Provide RS485 communication Interface(optional)
 
 
u        High performance, low price 
 
 
 
 
 
 
Features:
 
 
 
u         u     Real time monitoring carbon monoxide level with range from 0 to 1000ppm
 
 
u        u     Semiconductor sensor with 5 years long lifetime
 
 
u         u     LCD can display CO, temperature and humidity, also ventilation device status etc.
 
 
u         u     Full time monitoring CO level, even the slightest leak can be detected
 
 
   u   u     It can work as a alarm or controller of carbon monoxide, also as a transmitter
 
 
u     Provide up to 0~10V analog output and 2 relay dry contact outputs
 
 
u   Two alternatives for the analog output: linearized over full range output or PID control output
 
 
u   Preset the first and the second alarm levels for measured carbon monoxide with a buzzer alarm
 
 
u   RS–485 communication interface, 15 KV antistatic protection, independent address setup
 
 
 
 
 
Applications:
 
Carbon monoxide is a deleterious gas with colorless and odorless character , which could be absorbed by lung quickly, the speed rate of combination of CO and hemoglobin more than 250 times with oxygen, then stops oxygen circulation around the body; which have big character of heavy toxicity, so CO poisoning have became a big problem around the world.
 
 
 
 
 
F2000IAQ-CO is used to monitor room CO level and temperature as well as relative humidity. With one 0~10VDC analog output and two dry-contact of relay outputs, F2000IAQ-CO can be as a programmable logical controller to direct control a ventilation system, and also as a transmitter of CO level to connect with a DDC/PLC.
 
 
 
 
 
F2000IAQ-CO can provide RS-485 communication interface to connect it with a PC or another control system, so make each room ventilation system be managed and controlled intelligently. It’s as a prevent monitor of CO potential leak and a controller of ventilation system in bellows application.   
 
 
u       Human environment, Industrial environment
 
 
u       Underground parking lot, maintenance garage
 
 
 u       Freezing machine room and other places where air quality is easy to worsen